Motorcycles & gear

Ducati Monster 620 ie sport brembo edition

Specifications

Description

The 620 is the perfect entry to the Monster, it is the lightest and easiest handling Ducati. The motorcycle of choice for the official Ducati riding courses, the 620 offers a low seat height and a comfortable, upright riding position.

So very good for a smaller and lighter rider between us.

Perfect power and weigh ratio for the roads and curves here in Tenerife.

Aswell this bike has been updated with a gp2 Brembo brakepump and fuelbooster plug to add a bit more powerpunch and a 6 speed slipper clutch helps the down shifting way more then the original setup.

Aswell the classic look because of the colorsceens and low hanging upgraded carbon fiber termignoni exhaust ,also a high reduction of weight due to the exhaust change.

This bike not only looks great, it rides as easy as a bicycle and sounds pretty good!

Technical specs

Model: Ducati Monster 620
Year: 2005
Category: Naked bike
Rating: 73.6 out of 100. Show full rating and compare with other bikes
Engine and transmission
Displacement: 618.00 ccm (37.71 cubic inches)
Engine type: Twin, four-stroke
Power: 73 HP (60.9 kW)) @ 9500 RPM
Torque: 57.00 Nm (5.8 kgf-m or 42.0 ft.lbs) @ 6750 RPM
Compression: 10.5:1
Bore x stroke: 80.0 x 61.5 mm (3.1 x 2.4 inches)
Fuel system: Injection. Marelli electronic fuel injection, 45 mm throttle body
Gearbox: 6-speed
Transmission type,
final drive: Chain
Clutch: APTC wet multiplate with hydraulic control
Chassis, suspension, brakes and wheels
Frame type: Tubular steel trellis
Rake (fork angle): 24.0°
Front suspension: 43 mm upside-down fork
Front wheel travel: 130 mm (5.1 inches)
Rear suspension: Progressive linkage with adjustable Sachs monoshock
Rear wheel travel: 148 mm (5.8 inches)
Front tyre: 120/60-ZR17
Rear tyre: 160/60-ZR17
Front brakes: Single disc
Front brakes diameter: 320 mm (12.6 inches)
Rear brakes: Single disc
Rear brakes diameter: 245 mm (9.6 inches)
Physical measures and capacities
Dry weight: 168.0 kg (370.4 pounds)
Power/weight ratio: 0.4966 HP/kg
Seat height: 770 mm (30.3 inches) If adjustable, lowest setting.
Wheelbase: 1,440 mm (56.7 inches)
Fuel capacity: 14.00 litres (3.70 gallons)

Ducati Scrambler Classic 800

Specifications

Description

The Classic version is aimed at those who appreciate attention to detail and 1970s style, but who don’t want to compromise on riding pleasure and the functionality of a modern bike. It is characterised by unique, refined details, such as the aluminium front and rear mudguards, the spoke wheels and the brown seat with diamond-shaped inserts. In Orange Sunshine.

We did change out the original tires, mt60 rs to a good road tire for better handling and grip.

On this one we have installed some protection guards and that oldschool look with a motor-cross handle bar and gear indicator

Again a nice light motorcycle to ride on those curvy roads we have to offer all over.

Aswell for the rider that is looking to take a passenger with then this is your perfect option as the sitting position is more upright and more comfortable overall.

Technical specs

Model: Ducati Scrambler Classic
Year: 2015
Category: Classic
Rating: 73.1 out of 100. Show full rating and compare with other bikes
Engine and transmission
Displacement: 803.00 ccm (49.00 cubic inches)
Engine type: V2, four-stroke
Power: 73.76 HP (53.8 kW)) @ 8250 RPM
Torque: 68.00 Nm (6.9 kgf-m or 50.2 ft.lbs) @ 5750 RPM
Compression: 11.0:1
Bore x stroke: 88.0 x 66.0 mm (3.5 x 2.6 inches)
Valves per cylinder: 2
Fuel system: Injection. Electronic fuel injection, 50 mm throttle body
Fuel control: Desmodromic valve control
Cooling system: Air
Gearbox: 6-speed
Transmission type,
final drive: Chain
Clutch: APTC wet multiplate with mechanical control
Driveline: Chain; Front sprocket 15; Rear sprocket 46. Primary drive: Straight cut gears; Ratio 1.85:1.
Emission details: Euro 3
Chassis, suspension, brakes and wheels
Frame type: Tubular steel Trellis frame
Rake (fork angle): 24.0°
Trail: 112 mm (4.4 inches)
Front suspension: Upside down Kayaba 41 mm fork
Front wheel travel: 150 mm (5.9 inches)
Rear suspension: Kayaba rear shock, pre-load adjustable
Rear wheel travel: 150 mm (5.9 inches)
Front tyre: 110/80-ZR18
Rear tyre: 180/55-ZR17
Front brakes: Single disc. ABS. Four-piston calipers.
Front brakes diameter: 330 mm (13.0 inches)
Rear brakes: Single disc. ABS. Floating disc. Single-piston caliper.
Rear brakes diameter: 245 mm (9.6 inches)
Physical measures and capacities
Dry weight: 176.5 kg (389.1 pounds)
Weight incl. oil, gas, etc: 192.5 kg (424.4 pounds)
Power/weight ratio: 0.4179 HP/kg
Seat height: 790 mm (31.1 inches) If adjustable, lowest setting.
Wheelbase: 1,445 mm (56.9 inches)
Fuel capacity: 13.50 litres (3.57 gallons)

Ducati Monster S2r 800

Specifications

Description

Those who wish to enter the Monster family with a bigger bang, both in terms of styling and performance, need look no further than the S2R 800.

We have created a full classic look and it came out very well!

We reduced the weight with replacing it with a full racing exhaust straight tube and carbon fiber cans from termignoni.

We installed a slightly lower handle bar system by doing a top yoke clip ons install which gives you that caferacer look but not the backpain that comes with that look.

Again a beautiful classic look monster but with a bit bigger engine and a bit more power that comes with that.

This model is as well Available for the riders with a A2 drivers license.

Technical specs

Model: Ducati Monster S2R 800
Year: 2007
Category: Naked bike
Rating: 80.3 out of 100. Show full rating and compare with other bikes
Engine and transmission
Displacement: 803.00 ccm (49.00 cubic inches)
Engine type: V2, four-stroke
Power: 76.03 HP (55.5 kW)) @ 8250 RPM
Torque: 72.60 Nm (7.4 kgf-m or 53.5 ft.lbs) @ 7400 RPM
Compression: 10.5:1
Bore x stroke: 88.0 x 66.0 mm (3.5 x 2.6 inches)
Valves per cylinder: 2
Fuel system: Injection. Marelli electronic fuel injection, 45 mm throttle body
Fuel control: Desmodromic valve control
Cooling system: Air
Gearbox: 6-speed
Transmission type,
final drive: Chain
Clutch: APTC wet multiplate with hydraulic control
Exhaust system: 2 aluminium mufflers
Chassis, suspension, brakes and wheels
Frame type: Tubular steel trellis frame
Rake (fork angle): 24.0°
Front suspension: Marzocchi 43 mm upside-down fork
Front wheel travel: 130 mm (5.1 inches)
Rear suspension: Progressive linkage with preload and rebound adjustable Sachs monoshock. Aluminium single-sided swingarm
Rear wheel travel: 148 mm (5.8 inches)
Front tyre: 120/60-ZR17
Rear tyre: 180/55-ZR17
Front brakes: Double disc
Front brakes diameter: 300 mm (11.8 inches)
Rear brakes: Single disc
Rear brakes diameter: 245 mm (9.6 inches)
Physical measures and capacities
Dry weight: 173.0 kg (381.4 pounds)
Power/weight ratio: 0.4395 HP/kg
Seat height: 800 mm (31.5 inches) If adjustable, lowest setting.
Wheelbase: 1,440 mm (56.7 inches)
Fuel capacity: 14.00 litres (3.70 gallons)

Gear

Not only with the motorcycle we want to offer you the classic retro look, aswell with the provided gear.

Gloves

Classic black
The Segura Horson is very much a back-to-basics, summer-weight glove. Made from a goat’s leather, it is exquisitely comfortable to wear. For added comfort, the leather panels are interspersed with stretch material. On the inside, the glove has a polyester comfort lining. For added protection, you get a Poron panel on the main knuckle. In the palm, there are extra layers of leather for increased abrasion resistance. The Horson has a short cuff with a perforated panel for air flow. The glove fastens with a Velcro strap.
Specification
• High quality goat leather construction
• Stretches for comfort
• Short cuff
• Velcro cuff adjustments
• Shell protector
• Poron reinforcement
• Reinforced palms
• CE approved
• 1 Year Warranty
• Polyester comfort lining

Jacket

We provide this jacket in our gear package
Classic look and ECE homologation to the European law
Segura Oskar Jacket Black. Vintage style summer jacket with ample mesh panels for magnificent ventilation. With homologated protections on shoulders and elbows.
Main features:
• Made of FibreTech 600D polyester with large panels of strong mesh on the front, the rear and the sleeves. The back is fully vented.
• Highly resistant, fixed mesh lining.
• Removable Protect Flex Omega protections on the shoulders and elbows with CE certification. The height of the elbow guards is adjustable.
• Compartment for installing a back protector with CE certification (not included).
• Collar, waist and cuffs adjustable via snap buttons.
• Zips on the cuffs.
• 2 outer zipped pockets.
• 2 inner pockets.
• CE certified jacket

Helmet

We have various sizes of helmets available and we can swap the clear flat lens to a grey dark bubble lens on demand.
Biltwell Gringo S ECE and OEM certified for the European homologation law
Technical Details
• Injection-molded ABS plastic outer shell is rugged yet lightweight
• Three-piece Expanded Polystyrene (EPS) safety shell dissipates impact loads and enhances helmet structure for safety without compromising comfort
• Molded urethane chin bar pad dissipates energy from frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• CE-certified, injection-molded polycarbonate shield has anti-fog and anti-scratch treatments for safety and durability